|
|
Build Your Online Product Catalogs?
| Product Name: |
spiral tube forming machine
|
| Supply Ability: |
100 |
| Related proudcts |
|
| Specifications |
ATM-1500 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
1 |
| Unit Price: |
|
|
Spiral tube forming machine ---ATM-1500
1. Price basis: USD24,000.00 FOB Shanghai (CHINA)
2. Payment: 30% down payment by T/T in advance
the balance by T/T after you checked the machine in our factory
lead-time : within 15 days after receiving your payment.
Note:1.Above offer include all dies and ***re part
2.Before deliver you could send one technician to our factory getting training, this training is free of charge.
3.Guarantee: within two years since the date of B/L
INTRODUCTION OF SPIRAL TUBE FORMING MACHINE
This machine line is for producing round air duct for various uses, such as for HVAC round ducts, oval ducts, chimney flue, etc.
I Advantages
1.1 Special mould for various tube diameters, very easy to change and adjust, no needs crane or too much manpower.
1.2 Large diameter range
1.3 High speed synch flying cutting system.
1.4 PLC control, convenient operation
1.5 Light and small, suitable for site work.
II Main technical data
2.1 Diameter of round tubes:85mm ~ 1500mm.
2.2 Max. Tube length: unlimited.
2.3 Thickness of strip: 0.35 ~ 1.2mm
2.4 Width of strip: 137mm ~ 140mm
2.5 Strip speed: 1~40m/min, adjustable
2.6 Suitable strip material: aluminum, stainless steel, galvanized steel, etc.
2.7 Dimension: 2350mm x 2200mm x 2580mm (can be loaded in one 20¡¯ container,
2.8 Weight: 2000kg
2.9 Power of main motor: 5.5kw,380Volt,50Hz
2.10 Power of cutting motor: 4kw
2.11Pneumatic tank Pressure 0.5¡ª0.7*** £¨compressor£©
III Main configuration
3.1 Decoiler mechanical expanding type
3.2 Control system: JAPAN OMRON transducer, PLC control
3.3 Driving system: Spiral subulate gear type decelerator (low noise, large moment)
3.4 Hydraulic system: Electromagnetism valves are from Taiwan or imported from famous co***nies.
3.5 Material of forming rollers: GCr15 bearing steel, quenched, HRC58-62
IV Accessories acco***nied with the machine
4.1 Unloading rack: one set, 2000mm long
4.2 Cutting blade: two pieces (including one piece on the machine)
4.3 Four press-adjusting |
| Company: |
Shanghai Metal Forming Machine Co.,Ltd
|
| Contact: |
Mr. Shuli Pan |
| Address: |
Building D,299 Tangming Road,Litahui, Songjiang District,Shanghai, China |
| Postcode: |
201617 |
| Tel: |
86-21-57842040 |
| Fax: |
86-21-57841819 |
| E-mail: |
|
|
|
|
Home
